1966 Factory V8 Valiant Signet Restoration For My Other Daughter
Buttoned up the AC lines. Pressure tested it and then pulled a vacuum. Now I know when I weld up the other drier I know if it is the dryer if it leaks. Heater hoses installed, ordered a molded 90 degree for the valve to core. Mounted all the AC and shut off valve brackets. Plasti-dipped the line clamps. Installed a new wire on AC clutch and installed the clutch. Rear ground wire installed. The reproduction 4 barrel throttle cable bracket is a perfect fit (cut off the kickdown linkage). Just need to make sure of the position of the line clamp on the radiator support before drilling.
Buttoned up the AC lines. Pressure tested it and then pulled a vacuum. Now I know when I weld up the other drier I know if it is the dryer if it leaks. Heater hoses installed, ordered a molded 90 degree for the valve to core. Mounted all the AC and shut off valve brackets. Plasti-dipped the line clamps. Installed a new wire on AC clutch and installed the clutch. Rear ground wire installed. The reproduction 4 barrel throttle cable bracket is a perfect fit (cut off the kickdown linkage). Just need to make sure of the position of the line clamp on the radiator support before drilling.