Need advice 360 timing chain cam/crank slightly off

dodgy said

Isn't it this dot that should be at 12

View attachment 1716005744

Click to expand...

It's the stamped circle just to the right of that red mark

Unless they got that timing set out of the bargain bin, failed QC, cam gear stamped incorrectly, way wrong bin. It's way off as installed.

Harbor freight dial indicator and base with the extensions. Solves the tool issue, print out a degree wheel or buy a cheap one.

https://www.harborfreight.com/1-in-travel-machinists-dial-indicator-63521.htmlhttps://www.harborfreight.com/multi-position-magnetic-base-with-fine-adjustment-63663.html
Amazon has extension tips for around $5

Degree wheels can be had for about $20

Buy them, and return some of it if you never plan to use it again... shady but been done a lot over the years.

About $50 to do it right and verify installed centerline. I'd put it in at 108-110. Short duration cam and doesn't really need anymore help IMO.