Any 10 second "All Throttle" 318's in door cars ?

318willrun said

Playing with the calculators..... Online calculator says 447 hp to run 10.99 in a 3000 lbs car ..... That would be with the ideal converter and gears, I get that.
So is the question 447 hp obtainable? That is 1.4 hp per cubic inch. I would think yes.

Click to expand...

How much work do you want to do? I can tell you what you need. It’s not hard.

You can do it on iron heads IF you dont mind grinding. You need a single plane intake. At least 1.750 headers. 1.875 would be better.

You‘ll need to be in the 285ish cam range. No less than 11:1 compression.

You need to make power at 7k and shift at 7400-7500, so you need a GOOD oil pan with the biggest diameter pick up you can find. The Milodon Super Stock pan is the BEST choice. Good luck finding one. I have two. With the near impossible to find pick ups.

You should have pistons without tractor rings. 1/16 rings should be the thickest ring you should have and an .043 or 1 mm ring would be better.

The rest is getting the valve job right, the round stuff round and the straight stuff straight.