Would you run these axles?

AlaskaJeff said

Good thing it's not your car. :thumbsup: I am not going to be doing 4,000 RPM clutch dumps with slicks on the back........

Click to expand...

Then go with 1/2" - 20 screw ins IMO. I'm thinking you'll twist off the 7/16".
Then you can worry about twisting the axle splines!

I believe these are 2" screw in.






With the old Cragar wheels I needed open ends legs.
With the Weld I really need longer studs as 2" studs are flush with the wheel hub.