W2's
Not a good example but this was a five minute search.
Sold my 64 Valiant to a friend and now I’m selling off all the other parts.
First off is a NEW, never fired, custom built 10:1 408… estimated 650 hp
360 .030 block
Decked and line honed
ARP head and main studs
Balanced rotating assembly:
•Mopar 4” stroke Hemi flanged forged steel crank w/ 2.1 (SBC) rod journals
•JE 23cc dished pistons w/floating SBC diameter wrist pins
•JE CM file fit rings
•Eagle H beam 6.135 rods
•Milodon windage tray
•Milodon fixed gear drive
•Chet Herbert .604 solid roller cam
•Crane lifters
•W2 CI ported heads, Ferrea SS 5/16” stem valves, bronze guides
•Harland Sharp split ratio rocker arms
•Smith brothers pushrods
•Holley Strip Dominator ported intake
•ATI balancer…. $9500 FIRM
Short block is assembled
Heads are ready to bolt on
Chose not to fully assemble so moving it would be easier.
Also available separately:
273-360 “Holley” aluminum valve covers by M/T.. $185
New A body W2 Hedman Hustler fenderwell hedders w/head plates & gaskets… $1,050
Aluminum case 833 3 spd w/OD, 309:1 E body w/an B body to an A body location mounted rebuilt Hurst Super Shifter.. $1500
A body 833 CI case 266:1… $1100
273-360 Lakewood blow proof w/block plate…$695 (red).. $750 (blue)
Dana 60 truck housing (no ends) w/Hemi drum brakes … $500
Dana 60 3.73 gear… $275
DANA 60 bolt together 35 spline posi… $600
B body Dana 60: 36” wide, 4.56 Strange spool / 35 spline axle, large studs wildwood disc brakes, ladder bar and wheelie bar brackets.. $1600
Old fiberglass hood scoop… $175
Box of misc parts: (A body)
4 boxes of drum brake hardware, 1 brake cable, 1 wheel cyl, other stuff.. $80
Cross posted See less
Not a good example but this was a five minute search.
Sold my 64 Valiant to a friend and now I’m selling off all the other parts.
First off is a NEW, never fired, custom built 10:1 408… estimated 650 hp
360 .030 block
Decked and line honed
ARP head and main studs
Balanced rotating assembly:
•Mopar 4” stroke Hemi flanged forged steel crank w/ 2.1 (SBC) rod journals
•JE 23cc dished pistons w/floating SBC diameter wrist pins
•JE CM file fit rings
•Eagle H beam 6.135 rods
•Milodon windage tray
•Milodon fixed gear drive
•Chet Herbert .604 solid roller cam
•Crane lifters
•W2 CI ported heads, Ferrea SS 5/16” stem valves, bronze guides
•Harland Sharp split ratio rocker arms
•Smith brothers pushrods
•Holley Strip Dominator ported intake
•ATI balancer…. $9500 FIRM
Short block is assembled
Heads are ready to bolt on
Chose not to fully assemble so moving it would be easier.
Also available separately:
273-360 “Holley” aluminum valve covers by M/T.. $185
New A body W2 Hedman Hustler fenderwell hedders w/head plates & gaskets… $1,050
Aluminum case 833 3 spd w/OD, 309:1 E body w/an B body to an A body location mounted rebuilt Hurst Super Shifter.. $1500
A body 833 CI case 266:1… $1100
273-360 Lakewood blow proof w/block plate…$695 (red).. $750 (blue)
Dana 60 truck housing (no ends) w/Hemi drum brakes … $500
Dana 60 3.73 gear… $275
DANA 60 bolt together 35 spline posi… $600
B body Dana 60: 36” wide, 4.56 Strange spool / 35 spline axle, large studs wildwood disc brakes, ladder bar and wheelie bar brackets.. $1600
Old fiberglass hood scoop… $175
Box of misc parts: (A body)
4 boxes of drum brake hardware, 1 brake cable, 1 wheel cyl, other stuff.. $80
Cross posted See less