Finally Put Electric Power Steering In My Dart

So to install this I first bought another steering collum so I wouldn't destroy my original. We had to remove the collum and after disassembly we wound up cutting the lower half of the collapsible section off of the column (giving us more header clearance. We then fabricated a flange and welded it to the column so that the motor coyne bolted to it. I wound up buying Allen head bolts for it so they cleared the collum. The shaft had to have the collapsible nylon inserts removed and the shaft had to be step by step shortened until we got to the correct length. I used a Borgeson coupler at the steering box and a Borgeson universal joint inside the steering column (I listened the links above for the Borgeson parts). The wiring was very basic, unstitched heavy red wire to starter solenoid battery post and heavy black to a good ground. Small red to ignition. I just Velcroed everything to the carpet and my buddy Larry.made the nice side panels to hide everything.