That port is a 2.02 but i have ports from 1.88,192 and 2.00. They were all 1.88 stock tulip valves. 192, and 200 and 2.02 are nail heads (2.02s cut down)
It vary well could be, as i had no clue about off set of Bowl and cyl wall side.
So that was your post about porting a Mopar head on Bruce’s flowbench site. That was fun following that. If I remember right you hit water over on the sides of the shortside. That was a 110% effort and it does deserve what you have learned to be applied.