1974 Plymouth Scamp Project - Lots of good parts - $7,500
1974 Plymouth scamp project. Hate to sell but haven’t had any time to work on it.
Solid car with lots of money spent on chassis and suspension work. Full cage, subframe has been connected and has new floor pan.
Complete qa1 tubular front suspension- upper and lower control arms, strut bars, torsion bar adjusters, and k member. Qa1 shocks and big disc brakes from dr. diff on all 4 corners. 8 3/4 rear end with hotchkis leaf springs. Springs have been offset by 1/2 inch to fit some 275/35r18 tires in the rear. 245/40r18 in the front. Mustang fr500 wheels machined to fit. Big bolt pattern all around. Srt bucket seats already mounted.
I have bumpers, hood, trunk and most trim. All glass except windshield
Only rust is small hole in trunk floor.
Tons of parts for a cool Mopar build! My goal was to make it a road course/ pro touring hot rod that could be reliably street driven.
Also have a later model eagle head 5.7 hemi (with a-body conversion motor mounts) and nag1 transmission. Can add in for the right price.
Reach out with any questions.
$7.500.00
1974 Plymouth scamp project. Hate to sell but haven’t had any time to work on it.
Solid car with lots of money spent on chassis and suspension work. Full cage, subframe has been connected and has new floor pan.
Complete qa1 tubular front suspension- upper and lower control arms, strut bars, torsion bar adjusters, and k member. Qa1 shocks and big disc brakes from dr. diff on all 4 corners. 8 3/4 rear end with hotchkis leaf springs. Springs have been offset by 1/2 inch to fit some 275/35r18 tires in the rear. 245/40r18 in the front. Mustang fr500 wheels machined to fit. Big bolt pattern all around. Srt bucket seats already mounted.
I have bumpers, hood, trunk and most trim. All glass except windshield
Only rust is small hole in trunk floor.
Tons of parts for a cool Mopar build! My goal was to make it a road course/ pro touring hot rod that could be reliably street driven.
Also have a later model eagle head 5.7 hemi (with a-body conversion motor mounts) and nag1 transmission. Can add in for the right price.
Reach out with any questions.
$7.500.00