New Victor340 intake from Jegs
On mine the distance from the long walls of runners 3 to 5 and 4 to 6 is about .060” more than the gaskets measured width. I was only able to rough up and work the corners like I mentioned. The short walls line up after port matching though, but now those four runners are slightly wider. All I can do is center the intake with the gaskets and heads, leave a slight .030” step on those runners long wall. Not grinding (widening) on my TF’s to make those ports match. Not worth it.
On mine the distance from the long walls of runners 3 to 5 and 4 to 6 is about .060” more than the gaskets measured width. I was only able to rough up and work the corners like I mentioned. The short walls line up after port matching though, but now those four runners are slightly wider. All I can do is center the intake with the gaskets and heads, leave a slight .030” step on those runners long wall. Not grinding (widening) on my TF’s to make those ports match. Not worth it.