Tremec TKX first cuts

DC Dart said
It seems like it should be simpler to position the MC. But I played around for quite awhile trying to get what I felt was nice alignment. I took a die grinder and ground a little clearance on the back side of the clutch pedal. The rod was almost touching the pedal. Wanted a little room.
I think the SST pedals give more room in that area.
I would recommend having someone help when mounting the MC. Just hold it on the engine side while the rod alignment was being checked.
I have not given the reservoir any thoughts. Kinda forgot about it. I repainted my MC area of fire wall when I did the floor so I understand about the new paint. The only thing in my engine bay is the clutch MC right now.
Would like to see some reservoir mounting ideas.
Hopping to get my pedals and cross member painted this weekend.
Oh. Is my SST MC a wildwood?
Was hoping to hear a longer term review from jcolman. I am sure who bought it will appreciate the work put into it.

I tried having my wife hold it in place but when I depressed the pedal, the MC kept moving on her. So that's why I decided to just drill a hole and then elongate it depending on which way it needed to go. The push rod doesn't go into the rubber boot absolutely perfectly but it's pretty dang close. I almost wonder if putting a couple thin washers on the bottom mounting bolts of the MC would change the geometry enough to make the rod go in perfectly but I can't imagine it being so damn touchy that anything less than perfection leads to failure. Guess I'll find out lol

I believe the MC is a Wilwood chinese knock off. I don't remember what the brand name is but it sort of has the same font as Wilwood. We'll see how it performs.

If I've got time this weekend, I'll see if I can find a nice spot for the reservoir that requires the least amount of drilling but also easily accessible for maintenance.