Need help with edelbrock 1406 carb

What I have more problems with is fuel starvation at top of 2nd gear. At the strip, I run out of fuel more than any other problem. This is at Bandemere at 5800 feet and a DA of 7000 to 8500 most of the time. I solved this by using a Fram filter with a 1/4' vapor separator line. I run this back to the tank using the Stock emissions control line from a 70's Duster. They are availble from Fine Lines. The problem is that aluminum carbs are really not designed to work with oxygenated gasoline. The Ethanol corrodes the Al leaving oxidation residue that plugs passages and the needle/seat. Constant attention is needed to prevent corrosion so at least cleaning or rebuilding the carb frequently will help reduce problems.