72 duster resto
As DionR mentioned, the bearing cap on the front hub will stick out past the flat face of the wheel. Also, you’ll have to run a 3/8” spacer on the front to clear the front hub or else have a machine shop hog out the center register of the wheel or taper down the nose of the hub. I opted to run the 3/8 spacer on mine.
As DionR mentioned, the bearing cap on the front hub will stick out past the flat face of the wheel. Also, you’ll have to run a 3/8” spacer on the front to clear the front hub or else have a machine shop hog out the center register of the wheel or taper down the nose of the hub. I opted to run the 3/8 spacer on mine.