Opinions on this cam for a 360

kdeboy said
Looking at a solid FT cam for an A body. Heads would be TF 190's, 10-10.5:1 compression ratio, 4.30 (or so) rear end, 3500 (or so) stall speed converter. Primarily street driven, needs to run on 91 pump gas but I want it to be quick. Looking at this one b/c all of their street cams have a wider LSA.
Comp Cams 20-629-5
Intake: 269 adv, 243 @ .050, 0.549 lift
Exhaust: 273 adv, 247 @ .050, 0.560 lift
LSA: 108

I know it's listed as an oval track cam, I was thinking that "might" mean it's a little more useable for street use than a drag race cam

That cam is similar to what I have in my 414. It's a Comp oval track cam too. Specs out at 272/280 advertised. 242/[email protected], .558/.572 lift w/1.6 rockers after lash, 108 LSA, installed at 107 if I remèmber correctly. Makes lots of low end & mid range torque. Mine peaked at 5300-5500. Your Trick Flows have better flow & more port volume than my ported iron heads. I've been playing around with the Wallace Racing Calculator lately & it shows your dynamic compression with be 9.0:1 and above with 10.1-10.5 static compression. Will that work with pump gas?