very nice your making around 630 hp . What size is your cam and what intake are you running . my cam is around 250@50 and 547 lift and i have a holley strip dominator i also have a rpm air gap with the Bloomer heads . . i may need more cam .
his cam is a roller that is 263@50. Not real big at all. It’s 640-650 ish gross lift. That helps as the heads pull up through that lift. His motor will make an honest 650 with better headers, and it under 12 to 1
my cam is small too. 260/264 565 gross lift flat tappet.
upgrading to a nice roller somewhere probably 266-268@50 and 650 gross lift would really take WAY more advantage of the heads, but that most likely isn’t in the cards for me.
not wanting a 9 sec car again, especially as I have a stock block.
my health has severely limited my ability to work on stuff like I used to. Emphysema, really is knocking down my strength and stamina. So something that stays together is important to me.
you do what you can do.