Eagle Forged Stroker Crank CRACKED

Can you ask of his knowledge, input for their H beam rods?:thankyou:


I don't want to muddy this thread, but I will answer this question and if a discussion on rods is needed then a new thread should be started.

Eagle rods are assembled in China with supposed ARP bolts and torqued to 50 lb/ft of torque before they are honed in China.

A Molnar rod is also assembled and the big end is bolted together and bored in China. The rod bolts are then removed and the rod and cap are sent in matched pairs.

When Molnar receives them they install real proprietary made Molnar ARP 2000 bolts and torque the caps to 80 lb/ft. Then they do the finally honing which results in

about .001" of overall material removal. Molnar rods are honed to within .0001" of the desired dimension.

You have to look at the honed dimensions on an Eagle rod because a lot of time they need the caps cut and re-honed. Plus a lot of Eagle rods have only supposed 8740 ARP bolts.

Since Tom Molnar started his career at Oliver rods, then work for years at K-1 , and then finally went out on his own and has 41 years of knowledge in this business, as well as, now

having his name attached to his product he knows rods and cranks. This is why I've done business with Tom for over 20-years. I without question trust the quality of his products

100%.

Tom