1968 Barracuda Rallye Dash gauge lenses removal

ricomondo said

I just went through this with the 71 Demon. Used a soldering iron to melt the plastic as stated above. Got repop lenses from PG Classics.
Didn’t wanna risk screwing them up with the soldering iron so I used JB plastic weld. It worked wonderfully! It’s thick and you can use it to “build up” the material. They are locked in nice and secure to the bezel.

Click to expand...

Thanks for the advice! I have the same gauge lenses to install, and found a few issues with the bezel in the form of broken guide pegs and some of the warning light lenses fell out as the hot melt adhesive holding them on peeled off. The guy who previously "restored" the dash used masking tape to hold them on and it caused further problems and I'd like to do a better job.

Can JB Plastic Bonder be removed with a soldering iron? It's described as permanent but I'd rather use something removable in case this ever has to be done again.