i always wanted a M-Code Cuda and finally found one several years ago. it was a cut up 426 Hemi drag car in Boston ten years ago then it went to Bartlesville, Oklahoma to a mopar racing guy who put a 440 in it. i was able to buy it from him as a roller with no racing parts. i then had the body sent to American Medal Direct (AMD) down in Georgia to have it put back to OEM stock. to do this, i bought a body shell from Arizona which was a beautiful NO RUST car and sent that to AMD. they then cut the entire floor pan with all accessory attachment metal from the donor car and welded it in the M-Code car. i now have a completely stock, OEM correct, perfect, no rust or bondo Cuda. i found a date correct 440 block which is being built presently with aluminum heads and other parts. i'm putting 6 bbl carbs on it and then a lift-off hood like that A12 69 Road Runner. i also had AMD install a 4 sp hump so i will have the only 69 M-Code Cuda (that i know of) that has a 440 6bbl with a 4 speed. it should be a very fun car to drive!