17” to 18” Wheel Option

Dartman_1 said
Are you looking to see if the fronts are opened up? They are. Had them machined to accommodate the front hubs.

Thanks for the feedback. You have the Enkei PF01’s on a Dart Sport or Duster as I recall correct? If so I’ve see your ride on Pro Touring Mopar. Love your ride!

I have moved the springs inboard on the rear. It’s not tubbed (yet), but definitely can fit more in back there. That setup with those wheels is pretty tight to the outer wheel wells however and had wondered if an 18x9 x 35mm might work all around. The other option is to just put new tires on these 17” wheels and run it if I can’t gain any additional width out of this setup.

Thanks! Yeah, I have Enkei RPF1’s on my Duster.

If you’ve moved the springs in but not done a mini-tub you should be able to run 18x9 +35’s all the way around, probably even +38’s. With the stock tubs you only gain about a 1/2” of clearance on the inside so you can’t go crazy with tire width, but that’s more than enough to pull off the +35’s or 38’s.