Hughes Engines 1.6 Rocker Geometry/Setup
Got out to the garage today to revisit the rocker setup- ended up running 2x .040” shims on each pedestal and using some comp cams 7692-16 compliments of @pittsburghracer gave me to use for mock up purposes.
Colored the valve stems, torques down shafts and Dialed in my side to side clearances, feeling good about the valve sweep after spinning the prick over by hand several times. The hot rodder in me says I’m sending it. Here we go!
Got out to the garage today to revisit the rocker setup- ended up running 2x .040” shims on each pedestal and using some comp cams 7692-16 compliments of @pittsburghracer gave me to use for mock up purposes.
Colored the valve stems, torques down shafts and Dialed in my side to side clearances, feeling good about the valve sweep after spinning the prick over by hand several times. The hot rodder in me says I’m sending it. Here we go!