Engines with lack bottom end power?
26/2.xx/727/2800 stall/3100lbs/800 cfm/1 3/4/2.5
26/2.xx = a 26 inch tire & 2.?? Gear ratio?
Then a 2800 stall in a 3100 lbs car with a 800 cfm carb, 1-3/4 headers with a 2-1/2 exhaust.
Correct?
Your problem is the whole package is a disastrous mismatch.
You’ve been told this before. What’s the problem?
The way the car is set up, I can run my *** to the ‘60 foot mark quicker than your car can. You’ve been told how to fix this issue before.
My question is built engine even ones operating in higher rpm bands seem to make more than enough low end tq/hp 1500-3500 rpm generally more than stock why some are soft down low? Generally people go on about torque but I've noticing lately most of these engines make good low end torque more than enough they shouldn't be a dog down low. So my guess it would probably overlap or some other cam spec but not exactly sure why? but doesn't seem to me be a torque/hp problem.
For the most part, you love to argue with myself tells g us we are wrong, twisting words around and manipulating words we say out of context to prove your point and others shoving your opinion and guessing as right and we are wrong.
And yet again you come here looking to fix an issue that you have been told you’re wrong on several times.
So tell us, how are you right, I’m wrong, but your car is slow as molasses dripping from a spoon on a cold January night?