/6 to 360 engine question
well, so much depends on which engine you pick and what it came out of.. but for starters, you'll need...
- V8 transmission (small block). If you stick with a 904, great. IF you go 727, great, but you'll need a shorter drive shaft
- IF you use the magnum, you'll need the magnum flexplate for balance. IF you use the LA, then you'll either need a balanced torque converter or a balanced flexplate for the 360
- You'll need adapting motor mounts to the /6 K-frame or swap the K-frame to a V8
- You'll need V8 exhaust
- V8 radiator
- IF you go magnum, you'll need provisions for fuel supply and a carb intake
- IF the motor came from a truck or Van, you'll need a 360 oil pan and pickup tube