Question about torsion bar adjustment

I have one more question. I am going to have to go over it all again once I get home to see what I'm missing because I must be missing something and that is definitely possible :p

As long as the amount of load that is placed on the front suspension of the car has not changed, the amount of load on the torsion bar hasn't changed, thus the bushing will turn no more or less regardless of the position of the torsion bar position (adjustment). So after adjustment it's center will be the same under load, just the relative position between it and the adjusting lever will be different. The position of the adjusting lever will never move from where it is, correct? If so, the bushing will not have moved. Just the amount of thread sticking out of the adjusting bolt that is pushing on it. (whether more or less, depending on raise or lower)

Sorry if I'm not explaining myself correctly. I might be completely off here.