Hate to be a pain for you guys but I am not good at adjusting the torsion bars on my Scamp. the upper control arms are adjusted as far out as they can go and was wondering if I raise the front end it ma
The shop manual is good on setting alignment but maybe not so much on what you're asking.
Ride height is not effected by the alignment,
BUT the static alignment is effected by the ride height.
As the wheel moves up in the wheel well it increases caster and negative camber. In a turn this helps the outside wheel lean in. It compensates for the body roll and then some to aid the tire.
Set your ride hieght with the adjuster in the lower control arm.
The factory spec uses the difference in height between lower control arm bushing and the lower ball joint.