Cam bearing issue
Pop In new bearings. Lube up cam bearings and cam with Lucas Oil engine assembly lube. (Like STP)
Slowly wind in the cam and keep cleaning off the milky gray bearing residue, keeping it lubed as you go, until you finally have a smooth turning, easy turning final fit with the cam.
Used cams works good with or without the relief cuts.
The better job you do installing the cam bearings in straight and true, the easier it is to fit the cam.
Have had good luck installing the cam bearings into the block with a little Vaseline on them, instead of them going in dry.
☆☆☆☆☆
Pop In new bearings. Lube up cam bearings and cam with Lucas Oil engine assembly lube. (Like STP)
Slowly wind in the cam and keep cleaning off the milky gray bearing residue, keeping it lubed as you go, until you finally have a smooth turning, easy turning final fit with the cam.
Used cams works good with or without the relief cuts.
The better job you do installing the cam bearings in straight and true, the easier it is to fit the cam.
Have had good luck installing the cam bearings into the block with a little Vaseline on them, instead of them going in dry.
☆☆☆☆☆