'65 console park lock cable A904
So I got the cable out. Good thing I looked in the manual, because it tells you to attach a wire to the end of it, so you can pull the new one through the floor to the shifter.
It attaches to a bracket, but it's different from the one shown in @65 Dartman 's photo. My bracket has a 90 degree bend.
The cable (housing) is 41" long. I believe the original part number was 2461929 according to this: Mopar Pushbutton transmission cables
I found a NOS column shift park cable on ebay and the part number on the packaging is 2460552, which matches that list on that site.
This side should be the same on all cable shifted 904's and 727's.
This side has the deep groove and a short eyelet. It appears that pushbutton cables have a longer eyelet.
So I got the cable out. Good thing I looked in the manual, because it tells you to attach a wire to the end of it, so you can pull the new one through the floor to the shifter.
It attaches to a bracket, but it's different from the one shown in @65 Dartman 's photo. My bracket has a 90 degree bend.
The cable (housing) is 41" long. I believe the original part number was 2461929 according to this: Mopar Pushbutton transmission cables
I found a NOS column shift park cable on ebay and the part number on the packaging is 2460552, which matches that list on that site.
This side should be the same on all cable shifted 904's and 727's.
This side has the deep groove and a short eyelet. It appears that pushbutton cables have a longer eyelet.