Biggest mistake ever- lunati cams

MerlinsMopar said
Agreed on my mistake which started when I purchased the speed master heads. They went right to the machine shop where the stock heads were done and when I picked them up, I noticed that the lunati springs were still on the stock heads and I told them that I needed them on the speed masters. Well they did change them over but never checked anything. I seen the dampeners were out along with the inner springs so I put the dampeners back in as instructed for break-in. That's when I noticed the difference in size and TG I did cuz that was a disaster brewing and at the longer installed height the spring psi was like 60lb.
I was hoping to ask lunati if they had the correct spring at installed height and after a portion of my life, was unable to talk to anyone which had me heated.

It sounds to me like your frustration should be aimed at the machine shop, not Lunati. They should have swapped the springs and at least contacted you if that wasn't going to be an easy thing to do.

As for the spring, everything Lunati sells is on their website. So if you can't find it there, they don't have it. It does suck that customer service has gotten so bad, but that's just about everywhere now. As far as Comp and Lunati being the same, it's very possible that they're now owned by the same parent company. I haven't checked into it but more and more it seems like all the older independent names have been bought up by one of about 3 of the major corporations, and that hasn't helped the customer experience at all.