GM Coil and Module Help Required

IMG_1439.JPG

IMG_1440.JPGThe Pink wire on the right side lower terminal of the coil goes to Ignition Run terminal on the ignition switch upper terminal .
The Blue wire on the Right side upper terminal of the coil goes to the start terminal on the ignition switch.
The white and pink are jumpers from the Module to the coil.
The 2 Grey wires from the Module to the Distributor.
The motor turns over when ignition key is turned to start but I am not getting any spark.
The Distributor is a Mopar electronic.
Any suggestions would be appreciated.