1970 "DUPED" Dart Swinger
I needed to pull part of the column off to replace ignition switch. The manual shows a special tool C-4044 to pull the shafts out of the bearing. Obviously I didn't want to spend $75 for a tool so I made my own. It cost $1.88 for a washer.
I used a section of 3/4 black pipe, a nut, bolt and larger washer. The nut fit perfectly.
I needed to pull part of the column off to replace ignition switch. The manual shows a special tool C-4044 to pull the shafts out of the bearing. Obviously I didn't want to spend $75 for a tool so I made my own. It cost $1.88 for a washer.
I used a section of 3/4 black pipe, a nut, bolt and larger washer. The nut fit perfectly.