So any good cam and lifters out there?

Hellrats said
I have put in at least 3 Mopar, 2 GM and 1 Ford small block camshafts in the past three years with no failures at all. I make sure the block is clean and the lifter bores are not too tight so the lifter can spin easy. Use Lucas hot rod oil only. I have only used Lunati camshafts and lifters lately. I gave up on Comp Cams. No problems with any of the Lunati camshafts at all. Make sure the engine starts up right away and break it in the correct way and they are fine.

Lunati is the only manufacture that I have had issues with.
Broke the engine in on my engine run stand, everything was fine.
Installed it in my car, upon start-up instant peck-peck-peck, shut it down fast.
Lifter plunger was stuck all the way down, bent push-rod and pushed it thru the rocker.
Changed the one lifter, push-rod and rocker and it has been fine for years now.