fuel issue

You can also make a Fiji fuel pump.

This was made from stuff I just had laying around.

Basic use.

Plastic container with screw on lid.

Tight fitting hole in top to put a hose through.

A second hole for a vent.

Fill with fuel.

Attach the other end of the hose to the inlet of the fuel pump.

Squeeze the bottle while plugging the vent hole. This will push fuel through the fuel pump and into the carb.

SAFELY secure the bottle and crank the engine. If it starts and pulls fuel from the bottle the carb, fuel pump and lines are good.

If it doesn't pull fuel from the bottle then the fuel pump is not functioning correctly, might be pump, might be escentric (sp?)

IMG_20230622_182814_01.jpg