Magnum 360 build. (HP/tq?)

ParDaddy said

You nailed it, I hadn't put them all on our let them that tight.. hand tightened them one handed ratchet-ish, then turned my motor several times by hand. As they loosened up I tightened them down..
Now I'm not getting oil up top, thru the pushrods.. gonna have my Son run the drill while I turn the motor...

Click to expand...

Somebody correct me if I'm wrong on this.
But the LA motor oils through the number two and number four cam journal to the heads to the passage from the cam to the rocker arm shaft.
The Magnum oils through the lifter from the oil gallery through the push rod to the rocker arm.
So technically you should not have to crank the Magnum motor around in order to oil the rocker arms. Because the oil is coming from the gallery rather than from a hole in the cam journal.

Also isn't it possible to put those roller lifters in backward to where the oil hole on the lifter is pointing away from the gallery.