Help me find the umph in my 360
To get a feel where you are with cam timing.
Bring it up to fire TDC on cylinder #6 compression stroke.
Now cylinder #1 will be transitioning between intake and exhaust.
Put a straight edge on the push rod end of the rocker arms, if they are level to each other then the cam is installed straight up.
If the exhaust rocker is higher then the cam is advanced.
If the intake rocker is higher then it is retarded.
Taking into consideration Performance Cams usually have a 4° advance ground into them, so this should show up even when the cam is installed straight up. Dot to Dot.
Worthy of a deeper look.
☆☆☆☆☆
To get a feel where you are with cam timing.
Bring it up to fire TDC on cylinder #6 compression stroke.
Now cylinder #1 will be transitioning between intake and exhaust.
Put a straight edge on the push rod end of the rocker arms, if they are level to each other then the cam is installed straight up.
If the exhaust rocker is higher then the cam is advanced.
If the intake rocker is higher then it is retarded.
Taking into consideration Performance Cams usually have a 4° advance ground into them, so this should show up even when the cam is installed straight up. Dot to Dot.
Worthy of a deeper look.
☆☆☆☆☆