Valve Cover Gasket Question (yes, another)

Duster_Dean said
Krazykuda -
See below. The 'Mopar' cover is the one that was on the car and failed twice. I purchased the chrome stamped cover because I've heard before that the cast aluminum are problems.
To be 'safe' (?) I'm going to use the stamped cover instead of the flashy Mopar cover.
I'll gentle use sealer between the gasket and cover.
The concensus seems to be to NOT use sealer between the gasket and head surface (even though that is where it leaks) so I won't use sealer there.
If it works then I'll switch out the drivers side cover also.

I'll let you all know how it turns out!
Thanks again.

View attachment 1716112950

Ok, follow up on the gasket and it leaks worse now than before - I resembled the old time mosquito patrol with a cloud bellowing behind me. Followed all directions to a 'T' inc;luding let it cure for 24 hours but no luck at all. Leaking along the bottom at the back I think, but air flow may have pushed it to the back. Next step is to take it to a shop - at least if it leaks I can take it back as many times as I need to.