Painless install almost done, no turn signals

67Dart273 said

Are you sure you have the dash indicators actually hooked to the turn circuits? Should be hooked to the front lamp terminals of the front turn lamp filaments NOT the parking lamps filaments. You may have a lamp/ shell grounding problem or wrong lamps, LED or otherwise

ARE you getting power with key on to and out of the turn flasher? (Hazard flasher should show power all times)

Click to expand...

Will have to check tomorrow on power at relay. I can swap the relay between turns and hazards and hazards work just fine with either relay so I don’t think it’s an LED issue unless my LED’s in the dash could affect it somehow.

I “rebuilt” my instrument cluster and bought/used new circuit boards from chargerspecialties. Old ones has jumper wires soldered on both sides.
I robbed the old connectors from the OE harness and soldered the new harness wires to them. They’re easy enough to depin and swap.

Mike