Carb and intake are leaning to passenger side

Thanks, I think I may have figured out a possible cause. First, the picture is not very good and at the angle it was shot, it looks like the whole engine is leaning. It's not and the motor mounts are good. What I realized after posting this is the arm of the front accelerator pump is resting directly on the aluminum plate (I guess it's a Mr Gasket Carburetor Heat Shield) on top of the intake. The old intake didn't have this and it looks like it's missing the spacers when I looked that up on Summit. I suspect that may be preventing the carb from fully tightening down on that side. I'm going to try removing it and see if the carb sits flatter.