Holley/Proform 50cc pump install

I have had a carb stumble for a couple of years now, that isn't a problem, if i roll the throttle instead of stabbing it...........
Well every once in a while i forget to roll the throttle(usually while competing)......stab.....stumble.....****.

I got me a 50 cc Squirter Pump and installed it tonight.
Kit came with 2 pump cams, a brown and a yellow. Yellow had a larger.....base circle? Assuming that it was for a Dominator carb, so i used the brown one. It only has One hole. in position #1 on the carb, there was more play then the adjuster could take up. Moving it to position 2 worked but, would start to travel off the cam, causing the pump to start to release at full throttle.

Bent lever so that it would be adjustable in position #1. Problem, was that the cam ramp was to flat and wouldn't squirt at the first motion of the throttle.
Drilled a 2nt hole in the brown cam and reinstalled/adj it. still to slow to activate at first touch of the throttle.

So blue cam when back on. (off of the 30cc pump setup) Touch throttle squirting response is back. way to late to start and test it.

NOW After All of That.
Do the 50cc pumps use the same cams, or is there a completely different pump cam kit, for the 50cc?