IMO, the middle ground between the std rocker gear heads, and the really high end heads are the Indy 360-2’s.
Indy 360-2 cnc230(oval port)-
Used head(but cleaned), Indy 2.10/1.65 valves(back cut on both), and what I believe is the valve job as delivered from Indy.
Tested in December 2015.
4.00” bore, 28” test pressure, no tube on exhaust:
Lift—— I/E
.100— 67.2/57.1
.200—136.0/111.4
.300—202.0/150.6
.400—259.6/174.4
.500—296.7/185.4
.550—305.0/188.6
.600—312.6/192.8
.650—319.4/196.0
.700—321.3/198.4
.750—315.6/201.3
