Windage Tray Height Location

YO7_A66 said
Windage Tray location up/down:

I am installing my windage tray on my 340/420 bottom end. I now have the ARP main cap studs that have the 3/8”-24 mounting studs for the tray. These are fully threaded so that the tray can be moved up/down to fit under the pan.

My main concern is, do I need to mount the tray as close to the crank/rods that I can, or as far up/away from the crank that I can?

Either way, it looks like it will be a little higher than with the OE main cap bolts with the tapped holes.

Thanks!

View attachment 1716124820

I would bring that way down, how will it will fit with the stroker crank and main studs I don't know. But get it as close as you can get "within reason" mine ended up like this:

pittsburghracer said
Does that cheap azz tray keep the oil out, or trap it in. Asking for a friend.

That was something that crossed my mind during the install - I added extra drainage slots & holes to help get oil back to the sump quicker.