Camshaft identification

I agree. I had used the Crane variant twice with good results.
Crane Cams 693941 Crane Hydraulic Flat Tappet Camshafts | Summit Racing
While not a huge power house, it has an increase in power while maintaining decent vacuum and a good idle. This is a really easy going cam on the valve train parts. A very good driver cam with increased power. I’d run it if it’s a daily driver, for sure. I would roughly out this cams RPM range in the 1500 - 5500 area.

It does like a 4bbl., headers and increased compression. 9.5-1 (Iron headed) is as far as I’d go. I’ve used in as low as a 7.8-1 ratio.