Instrument cluster connector terminals

For what it's worth, at least in pictures the Molex stuff isn't even really remotely "original", but based on the design I think they will work okay. The original ones almost remind me more of the typical barrel type connector you can get at any hardware store (the kind with red/blue/yellow insulation). It's a simple rolled piece with no locking features or anything like that, they just sort of friction fit in the housings. The Molex stuff actually has little locking tangs that could make them a little more interesting to install, but if they are smaller OD than the Deutsch stuff I have then hopefully they will fit the original housings. Should be showing up today, so with any luck I'll finally be able to get my fuel gauge reading correctly. Have tested everything from the sender to pretty much the back of the cluster at this point, and everything seems to read within spec, so thinking I might just have a bad connection somewhere on the cluster, either one of the connector pins or maybe a nut on the gauge stud or something. Will probably yank it out this weekend and do some bench testing on it to see if I can finally track it down. Reads fine when full, but just seems to read empty way earlier than it should.