Fabricated Leaf Spring Slider Brackets?

19_Dart_68 said

Hi there. I saw your thread earlier, but mine need to be under the frame (moving springs in).
So I think I will need to cut the framerail in order to fab the mount I am envisioning. The main reason being that I don't want the slider hanging down too far and drastically changing the ride height.

Click to expand...

I wanted to add that you’ll actually be lowering the ride height if you mount the sliders directly to the bottom of the frame rail. The body of the slider itself is actually not as tall as the shackles, so, you actually lower the car slightly even flat mounting the sliders. On my car I used the bottom of the frame stub as the height, and that lowered by car almost 3/8”. When younggun2.0 did his sliders and set them up into his frame rails he was lowering the car, about 1” if I recall correctly.