Shake rattle and roll
So while trying to route the plug wires better I found this. First pic is the coil wire the second is the #7 plug wire. These wires are basically brand new. Could this be a result of spark jump or is it something else? Neither wires are rubbing on anything. I have tried to separate the wires better but i cant seem to find away to keep them from touching near the cap. I could possibly spin the distributor and change the wire position on the cap but then the vacuum cannister would hit throttle linkage or firewall. Also on a side note. Do I need the "condenser" thing connected to the coil with electronic ignition the wire is damaged from being bent.
So while trying to route the plug wires better I found this. First pic is the coil wire the second is the #7 plug wire. These wires are basically brand new. Could this be a result of spark jump or is it something else? Neither wires are rubbing on anything. I have tried to separate the wires better but i cant seem to find away to keep them from touching near the cap. I could possibly spin the distributor and change the wire position on the cap but then the vacuum cannister would hit throttle linkage or firewall. Also on a side note. Do I need the "condenser" thing connected to the coil with electronic ignition the wire is damaged from being bent.