70 Duster power window install

Rudy`s Ride said
Hi everyone. My name is Mike. I have figured out how to put power windows and door locks in my 70 Duster using common mopar regulators.
I will try and show you how I did it and what parts I used. I am not a teacher and have never tried to explain how to build something so you may have to bear with me.
I am going to try and post lots of pics and measurements as I go and this is going to take me awhile to get it all up.
Ok so here goes.
I could have done this with linear actuators, which would have been much easier but I could not afford the price of them here in Canada not to mention I do not know much about them.
I had saved the power window motors, regulators, door locks and all the wiring out of an 80 Cordoba years ago. I also have a 87 Ram 1/2 ton with power windows too.
The first pic is the 80 Cordoba and next pic is 87 Ram

I’ve been messing around for years on converting my 71 Duster to electric windows. I like your idea of fabricating a motor onto the existing door parts. It looks like the motor is attached to the window crank, is that right?
I’ve also seen A1 n Nu-Relics power window kits but a bit pricy. I’m leaning towards Nu-Relics because of the HD parts. They also have a micro switch part that takes the place of the roll up handle n uses the handle as the switch instead of a flip switch on your door or console keeping it stock looking. If you get the complete set up Nu-Relics includes the S-conduit n wiring.
So how did your setup work out? Was there any draw backs that you’d do different ?