1965 MMP's Barracuda Hemi swap! The Ever Changing Build
Got a bit more of the radiator install finished up, found a few hoses that with a bit of trimming worked well. Also added a bit more of trim work..
I was hoping to test start the motor this weekend but I ran out of time and knowledge. Trans is primed as well as the fuel system. Still need to fill the motor with oil and prime the oiling system. This is going to be the issue as getting to the ports on the side of the block will be difficult I kinda ran out of room.. .I do have one easily assessable oil passage/ port. I'm running a 45* oil filter mount, on the back side bottom of the mount is a port that has a pressure sensor. I'm going to pull the sensor and prime the system off this port. should work out fine. fingers crossed.
Got a bit more of the radiator install finished up, found a few hoses that with a bit of trimming worked well. Also added a bit more of trim work..
I was hoping to test start the motor this weekend but I ran out of time and knowledge. Trans is primed as well as the fuel system. Still need to fill the motor with oil and prime the oiling system. This is going to be the issue as getting to the ports on the side of the block will be difficult I kinda ran out of room.. .I do have one easily assessable oil passage/ port. I'm running a 45* oil filter mount, on the back side bottom of the mount is a port that has a pressure sensor. I'm going to pull the sensor and prime the system off this port. should work out fine. fingers crossed.