Thermoquad throttle and kickdown linkage
you need a top kickdown rod (carb to bell crank on throttle bracket) from a 340 or 360 car it is already longer than a 318 rod and it is bent to kick to the drivers side for proper alignment.
If you don't want to get a proper rod, or can't find one, at least take the 2bbl rod and reverse the bend in the rod and turn it over (the bend still needs to go up and then down when installed). That way you can insert the 90 degree end into the bell crank hole from the opposite side like the 4bbl rod in the picture - at least it won't be so far out of alignment.
you need a top kickdown rod (carb to bell crank on throttle bracket) from a 340 or 360 car it is already longer than a 318 rod and it is bent to kick to the drivers side for proper alignment.
If you don't want to get a proper rod, or can't find one, at least take the 2bbl rod and reverse the bend in the rod and turn it over (the bend still needs to go up and then down when installed). That way you can insert the 90 degree end into the bell crank hole from the opposite side like the 4bbl rod in the picture - at least it won't be so far out of alignment.