Steering Wheel Conversion

I haven't used the classic industries piece, but I did convert my column shift over to a floor shift column using stock parts. I also run a reproduction Tuff wheel. You will need a Tuff wheel adaptor, either the original style that came with these cars from the factory or some kind of aftermarket reproduction, the Tuff wheel and even the reproduction Tuff wheels are not set up to bolt straight to the column.

The column style swap over is relatively straight forward, but you do need to disassemble everything and remove the roll pin from the upper end of the steering shaft. It can be done while in the car, but it's a lot easier to pull the entire column so you can deal with the pins and bearings and things on a bench instead.