Metal Building/ Garage…
We moved from Commiefornia to Texas for various reasons and finally was able to afford a shop. We couldn’t do that in Commiefornia as the permits alone were $45k!
My neighbor above me builds shops and I had a total of $20k to get a shop, concrete and electrical. His first quote for a 22x25x12 was $27k. I told thanks for the quote but I can’t afford that. A couple weeks later he texts and says he can do it for $17k. I told him that I had a budget of $10k for the shop and that I’m looking online for a building. He says that he can that cause he’s got some leftovers from another job. He got the job, and 2 weeks later I had my shop. I did go over on the budget for electrical by $2k.
My other neighbor that moved from Commiefornia is a contractor and helped me run power to the shop and I took over from there. He put in a 125amp circuit breaker and we ran 2 gauge wire 80ft under ground (I dug the trenches by hand) through 3 inch pvc pipe. I did the rest of the wiring myself. I bought a 10ft ceiling fan with 9 speeds cause it’s F’ing humid in north Texas. I’ll be insulating the shop at some point, hopefully this winter and I’m getting a mini split ac system too.
Building a carport in front of the shop right now, panels will be here next weekend and they are the same as the shop.
We moved from Commiefornia to Texas for various reasons and finally was able to afford a shop. We couldn’t do that in Commiefornia as the permits alone were $45k!
My neighbor above me builds shops and I had a total of $20k to get a shop, concrete and electrical. His first quote for a 22x25x12 was $27k. I told thanks for the quote but I can’t afford that. A couple weeks later he texts and says he can do it for $17k. I told him that I had a budget of $10k for the shop and that I’m looking online for a building. He says that he can that cause he’s got some leftovers from another job. He got the job, and 2 weeks later I had my shop. I did go over on the budget for electrical by $2k.
My other neighbor that moved from Commiefornia is a contractor and helped me run power to the shop and I took over from there. He put in a 125amp circuit breaker and we ran 2 gauge wire 80ft under ground (I dug the trenches by hand) through 3 inch pvc pipe. I did the rest of the wiring myself. I bought a 10ft ceiling fan with 9 speeds cause it’s F’ing humid in north Texas. I’ll be insulating the shop at some point, hopefully this winter and I’m getting a mini split ac system too.
Building a carport in front of the shop right now, panels will be here next weekend and they are the same as the shop.