73 /6 PS: Correct way to purge air from box?
Jack up the front of the car till front wheels are off the ground.. There's two bolts holding the fitting that's on the top power steering box, where hose goes on, theyre 7/16.. just slightly loosen those bolts, start engine, DON'T PUT YOUR ARM THRU THE WHEEL, INJURY MAY OCCUR ! - and gently tap the fitting either backward, or forward, the wheels will tend to go one way or the other, adjust till wheel has no bias, left or right. that will adjust your problem.. that's how to centre the "feedback".
Don't move wheel lock to lock till tightening those bolts.
You must have accidentally moved that fitting...
Good luck .
Jack up the front of the car till front wheels are off the ground.. There's two bolts holding the fitting that's on the top power steering box, where hose goes on, theyre 7/16.. just slightly loosen those bolts, start engine, DON'T PUT YOUR ARM THRU THE WHEEL, INJURY MAY OCCUR ! - and gently tap the fitting either backward, or forward, the wheels will tend to go one way or the other, adjust till wheel has no bias, left or right. that will adjust your problem.. that's how to centre the "feedback".
Don't move wheel lock to lock till tightening those bolts.
You must have accidentally moved that fitting...
Good luck .