71 Demon door gap/alignment

Ahh thanks Blu, thats about right where I am riding atm.. so the height is not going to be an issue. I will have to play with the drop I get at the bottom rear of the door as I cannot stay with the 1/8 gap I have between the door and the cowl, its just not enough.

No problem! Here’s the rest of the picture showing the whole door gap, and a picture of the drivers side as well. The drivers side has a little bit of sag but still not as much as compared to the cowl height difference. And no accidents or anything for the car, and all original panels at the time of these pictures. Definitely some shopping cart rash and door dings but nothing that should change any of the gaps.

These cars just were pretty loose when it came to body fits and tolerances. I looked at a lot of door/cowl/fender pictures when I fitted the ‘71 Dart front clip on my Duster, and came to the conclusion that the cowl height difference was a very common occurrence from the factory

uuid=0526DD3B-E40C-4971-BC3B-A9E7FBDF53F5&library=1&type=1&mode=1&loc=true&cap=true.jpeg

uuid=D73D51A2-25DF-4776-B514-DE361436517C&library=1&type=1&mode=1&loc=true&cap=true.jpeg