65 Barracuda daily driver
Another hiccup... So the Milodon instructions called for 1/4" or 3/16" space under the oil pick-up to the pan. My pan is 7 -1/16" deep and the I measured the old, compressed gasket to be 1/16", so 7-1/8" from the block to the bottom of the pan. So for a 1/4" gap the pick-up needs to be 6-7/8" below the block. At that height it's not parallel to the block, though. That is not going to work. The packaging says 318, but I assume it's the wrong pick-up.
I ordered a stock pick-up now. No idea what the Milodon is for, but it's not this pan.
As far as I know the pistons are stock, but does anyone know that part number 292-99?
Another hiccup... So the Milodon instructions called for 1/4" or 3/16" space under the oil pick-up to the pan. My pan is 7 -1/16" deep and the I measured the old, compressed gasket to be 1/16", so 7-1/8" from the block to the bottom of the pan. So for a 1/4" gap the pick-up needs to be 6-7/8" below the block. At that height it's not parallel to the block, though. That is not going to work. The packaging says 318, but I assume it's the wrong pick-up.
I ordered a stock pick-up now. No idea what the Milodon is for, but it's not this pan.
As far as I know the pistons are stock, but does anyone know that part number 292-99?